Powder EcoDescalk

AVAILABLE FORMATS

EcoDescalk 10 sachets

EcoDescalk 4 sachets

EcoDescalk 2 Pack x 4 sachets

EcoDescalk 3 Pack x 4 sachets

DETAILS

ALL PURPOSE

For all expresso, filter and capsule machines (Nespresso, DeLonghi, Krups, Tassimo, Saeco, Bosch...).

NATURAL

The best descaler composed of organic acids. It removes limescale quickly, prevents corrosion and improves the performance of the coffee machine.

BEST RESULTS

The correct maintenance of your coffee machine will avoid costly repairs and will extend the useful life of the appliance, as well as it will improve the aroma, quality and the taste of the coffee.

INSTRUCTIONS

STEP 1

Add 500 ml of warm-hot water (between 30 and 50 ℃) to the water tank of the coffee maker then pour in a sachet of EcoDescalk.

STEP 2

Leave the product to work for 20 seconds and then stir it to dissolve any undissolved remains of the product.

STEP 3

Operate the appliance without coffee with the solution and leave it to stand for 15-20 minutes.

STEP 4

Lastly, rinse the tank and run it twice just with cold water.

Play Video

HARD TREATMENT

FIRST DECALCIFICATION

State: Your coffee machine has not been decalcified during the first six months of its useful life.
Dosage of Hard treatment: 160 ml (8 caps) of EcoDescalk in 500 ml of water.

Irregular maintenance

State: If your machine has not received proper maintenance.
Dosage of Hard treatment: 160 ml (8 caps) of EcoDescalk in 500 ml of water.

Descaling indicator

Some coffee makers include an indicator that lights up when there is excess lime in the ducts. If decalcification has been carried out and the indicator does not shut off, follow the instructions below:

1º Turn off your coffee maker and unplug it. When you turn it on again the indicator will possibly turn off.

2º If the indicator is still on, your coffee maker may still have accumulated lime due to the use of very hard water (water with a lot of limescale). In this situation, it is recommended to use the shock treatment.

3º If the indicator is still on once the previous steps have been carried out, do not worry, your coffee machine is free of lime and in perfect operation. The indicator will turn off following the instructions from the manufacturer of your coffee maker.

INSTRUCTIONS

STEP 1

Add 500 ml of warm-hot water (between 30 and 50 ℃) to the water tank of the coffee maker then pour in a sachet of EcoDescalk.

STEP 2

Leave the product to work for 20 seconds and then stir it to dissolve any undissolved remains of the product.

STEP 3

Operate the appliance without coffee with the solution and leave it to stand for 15-20 minutes.

STEP 4

Lastly, rinse the tank and run it twice just with cold water.

Content: 4 sachets for 4 decalcifications

Weight: 30 g/ sachet

Total weight: 120 g

_______________

Content: 10 sachets for 10 decalcifications

Weight: 30 g/ sachet

Total weight: 300 g

Complies with the requirements established in the Commission Regulation (EC) Nº 907/2006 of 20 June 2006 amending Regulation (EC) No 648/2004 of the European Parliament and of the Council on detergents, as it is stated in section C of the Annex VII related to the ingredient data sheet according to the INCI nomenclature:
 (1) (2)

Composition information sheet

SAFETY DATA SHEET